Cooling Water

A number of treatment products are often added to prevent corrosion, scaling and fouling. Coating of sensors and other effects of these products must be taken into account when selecting analyzers. Discharge monitoring needs special attention because zero measurements must be reliable over time with little maintenance.

Choose your parameter from the menu to the left.

Chlorine, Ozone, Chlorine dioxide

Two different technologies are available for monitoring free chlorine, ozone, chlorine dioxide or monochloramine. The choice of the technology depends on water quality and treatment methods:

  • Amperometric three electrode system TRIDES: Seawater  or common city water. Treatment with free chlorine, chlorine dioxide or ozone. pH below 8.5. No anticorrosion additives. Amperometric systems have lower cost of ownership (no reagents). Under unknown conditions, however, it is safer to use a photometer.
  • Process photometers CODES: Work under the same conditions as the amperometric system. In addition they can be used also for monochloramine and total residual chlorine. No limit for pH levels. They also work well in the presence of anticorrosion additives. Biofouling can be powerfully reduced with the optional Cleaning Module.

A high precision portable photometer is needed for calibration in any case: CHEMATEST portable photometer

Details >

Oxygen (dissolved)

The choice of the instrument depends on cooling water quality and measuring range:

  • For the ppb range use OXYTRACE systems as for boiler feedwater;
  • For ppm use OXYSAFE systems as in potable water.

Details >


Stage – Storage & Distribution

Colorimetric process analyzer for the automatic, continuous measurement of phosphate in potable water. A key part of corrosion control systems.

Details >