Monitor AMI-II CACE Degasser AC

Specifications

Process measuring device for conductivity before / after cation exchange and after degassing, including continuous resin regeneration.

Complete system with:

Transmitter AMI-II CACE in a rugged aluminum enclosure (IP 66).
Three Swansensors UP-CON1000 SL conductivity sensors with slot-lock design and integrated Pt1000 temperature sensor, k = 0.04 cm^-1.
Flow cells Catcon-Plus SL CACE with digital sample flow meter and B-Flow UP-CON SL made of stainless steel 316L. Quick sensor release with patented slot-lock design.
EDI-Module with exchangeable sample chamber module and automatic deaeration.
Thermal degasser with minimal power consumption and sample flow.

Conductivity measurement
Measuring range	0.055 to 1000 µS/cm
Resolution	0.001 µS/cm
Accuracy (at 25 °C)	±1 % of measured value or ±1 digit (whichever is greater).
Response time (t90, specific conductivity)	< 5 sec.
pH and alkalizing reagent calculation
Range pH (25 °C)	7.5 to 11.5
Range concentration (e.g. ammonia)	0.01 to 10 ppm
Sample conditions
Flow rate	5 to 6 L/h
Temperature	up to 50 °C
Inlet pressure (25 °C)	0.5 bar
Outlet pressure	pressure free
EDI capacity	max. SC = 40 µS/cm as NH₄OH max. SC = 350 µS/cm as NaOH
Power supply
Voltage	100 - 240 VAC (± 10 %) 50/60 Hz (± 5 %)
Power consumption	max. 180 VA

For more information, please refer to the technical data sheet.